A few months ago I bought a Pentax Q system. While this camera is usually criticized for its very small sensor, I saw a tremendous opportunity for macro photography. I really enjoy the camera and use it for a wide variety of purposes with excellent results, but I have been hankering to try some snow crystal shots with it.
Why snow crystals? The sensor on the Q is a diminutive 6 x 4.5mm in size. A large snow crystal would be about that size, meaning that one could get a frame-filling snow crystal image (for a large crystal) at a simple 1:1 magnification, and smaller crystal could easily be photographed at 2:1. This makes for a much simpler setup than what is required for shooting snow crystals on an APS-C DSLR – where magnification needs to be 4:1 to 8:1. The Pentax Q is compatible with all my existing Pentax flash gear and focus peaking should simplify focusing. So I figure I’d give it a try.
So today, when it finally snowed, I tested the Q on my snow crystal macro setup. I usually use a reverse mounted 50mm macro lens (Sigma EX 50mm f2.8) on a bellows (135mm maximum) and extension tubes (180mm maximum). A flash is used to light the crystal from below. I decided to try the Q first with this setup, but just the lens and bellows. Due to how the bellows mount on the macro-focusing lens, they have to be extended to at least 48mm. So, here is a plastic ruler, the metric scale, taken with the Pentax Q and 50mm macro lens reverse mounted on a bellows extended to 48mm. As you can see, the frame covers less than 2 mm on the longer axis. That would be great for many snow crystal shots.
So here is one of my first shots. Not a pretty crystal, but the shot is clear enough:
One of the problems I saw right off is that the flash stays in P-TTL mode, even though P-TTL needs access to the lens’s electronic data to function properly. I could not figure out how to get the flash into manual mode, so I just worked with it the old-fashioned way, and put a diffuser over it to manage the power level.
So here is another shot – even at the minimum magnification, the crystal was too big to fit in the frame:
But… What’s that magenta rectangle in the middle of the shot? It can be minimized by desaturating the image, but I don’t like it. Here’s the desaturated image:
So… Plan B – skip reverse mounting and just use a macro lens mounted normally and shoot at 1:1 or 2:1. I tried the DA-F 100mm macro, but the working distances posed a problem with my tripod setup. So, back to the Sigma 50mm. The lens will go to 1:1 on its own and with a 25mm extension tube it will do 1.5:1. So I setup the Sigma 50 mm macro lens on a 25mm extension tube.
An early test - here again the crystal was larger than the 1.25:1 magnification that I had set up the lens for:
Here’s a very “fluffy” snow crystal lit by a flash from below and compact florescent lights from above:
By this time the snow had stopped… So that was it for today’s experiment. I’ll continue working with the Q for this kind of photography – need to work out what is going on with the flash and test some other lenses. I guess that the magenta triangle was some sort of lens flare from the reverse mounted lens, but there is still a bit of it in the shots taken with the lens forward mounted. I have never seen that in shots taken with other cameras (I’ve used this setup with the *ist-D, K-10D, K-7 and K-5.)
As for noise – at ISO 160 there is very little noise. The advantages of the system way out weight the disadvantages.
More experiments to come - assuming it snows some more! At the end of the day, the grass is till poking out of the snow. Less than an inch fell today, but more is coming.
No feedback yet
Form is loading...